Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Maximum Upload
Speed
Protocol Header Size
below Layer 3
Real Time Jitter Con-
trol
Description
The function is disabled by default.
Only for Traffic shaping enabled.
Enter a maximum data rate for the queue in the send direction
in kbits.
Possible values are
to
The default value is , i.e. no limits are set, the queue can oc-
cupy the maximum bandwidth.
Choose the interface type to include the size of the respective
overheads of a datagram when calculating the bandwidth.
Possible values:
•
(value in bytes; possible values are
•
(default value)
Only for Ethernet interfaces:
•
•
•
•
Only for IPSec interfaces:
•
•
•
•
Only for Traffic shaping enabled
Real Time Jitter Control optimises latency when forwarding real
time datagrams. The function ensures that large data packets
are fragmented according to the available upload bandwidth.
Real Time Jitter Control is useful for small upload bandwidths (<
800 kbps).
Activate or deactivate Real Time Jitter Control.
14 Networking
.
to
.)
201
Advertisement
Table of Contents
