GRAPHTEC FC8000 Series User Manual page 145

Press the POSITION (¡ã¡å ) key to set the original distance on
21
the data.
Confrm the setting and press the [ENTER] key (SET).
22
It will return to default screen once all the distance is set.
Supplement
l Measured distance is displayed in the top line in
the DISTANCE input screen. Input value (initially
same as measured value) is displayed under
that.
l If the input value is not changed, it will assume
that there is no difference between measured
distance and the distance in the data.
l Digits of settings can be changed by pressing
the [FAST] key.
Supplement
It will return to default screen without changing
l
the settings when you press the POSITION (? )
key (PREVIOUS).
l DISTANCE input screen for point 3 is displayed
if it is set to 3POINTS or more, so repeat steps
9 and 10 to set.
6-6