Setting The Space Rear - GRAPHTEC FC8000 Series User Manual

Setting the Space Rear

Operation
Turn on the AP MODE by performing the steps 1-6 of "Switching
1
Apparel Mode"
AP MODE is switched on and it will return to AP MODE screen.
Press the POSITION (? ) key (SPACE REAR).
2
SPACE REAR setting screen is displayed.
Press the POSITION (¡ã¡å ) key and increase or decrease the
3
setting value.
Confrm the setting and press the POSITION (? ) key
4
(PREVIOUS).
SEPARATOR settings will be selected and it will return to AP
MODE screen.
Confrm the setting and press the [ENTER] key (SET).
5
Setting will be set, and it will return to MEDIA setting screen (2/2).
Press the [MENU] key.
6
It will return to default screen.
P .4-14 .
Supplement
SPACE REAR cannot be set if the AP MODE is
off.
POSITION
Supplement
Setting range is between 7 and 30 mm.
POSITION
POSITION
Supplement
It will return to
without changing the settings when you press the
POSITION (? ) key (CANCEL).
4-17
MEDIA setting screen (2/2)