Download Print this page

GRAPHTEC FC8000 Series User Manual Page 223

Cutting pro.
Hide thumbs

Advertisement

Symptom
LCD Display
E04011
E04012
E04013
E04014
E04015
E04016
E04017
E04018
E04019
E04020
E04021
Possible Cause
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
Media set lever was lowered.
There was cancel operation by the Redo the process.
user.
There is a defect in the detection
settings value.
Registration mark was not
detected in the auto detection
area.
13-10
Solution
Check the media. Check the print
position of the registration mark.
Check the media. Check the print
position of the registration mark.
Check the media. Check the print
position of the registration mark.
Check the media. Check the print
position of the registration mark.
Check the media. Check the print
position of the registration mark.
Check the media. Check the print
position of the registration mark.
Check the media. Check the print
position of the registration mark.
Reload the media and try again.
Check the settings value.
Check the media. Check the print
position of the registration mark.

Advertisement

Troubleshooting

   Also See for GRAPHTEC FC8000 Series

   Related Manuals for GRAPHTEC FC8000 Series

Comments to this Manuals

Symbols: 0
Latest comments:
  • vincent cirillo Apr 28, 2016 12:49:
    HOW TO CHANGE CENTIMETER MEASURING UNITS TO INCHES MEASURING UNITS ON A GRAPHTEC FC 8000 SERIES PLOTTER