Test The Registration Mark Sensor - GRAPHTEC FC8000 Series User Manual

Confrm the setting and press the POSITION (? ) key
10
(PREVIOUS).
DETECTIONTHRESHOLDis selected and it will return to
DETECTIONTHRESHOLDadjusting screen.
Confrm the setting and press the [ENTER] key (SET).
11
Setting will be set, and it will return to ARMS setting screen (4/4).
Press the [MENU] key.
12
It will return to default screen.

Test the Registration Mark Sensor

If there still is a difference in the cutting, even after performing an
adjustment using the registration mark, it is possible to check if
there is a problem with the registration mark itself or the application
by evaluating the position of the registration mark plotted and
detected only using the plotter.
Operation
Print the standard registration mark in the accessory CD.
1
MARK TYPE1
Load the printed media onto the plotter.
2
Press the [MENU] key.
3
MENU screen is displayed.
Press the [2] key (ARMS).
4
ARMS setting screen (1/4) is displayed.
Next page
MARK TYPE2
5-21
POSITION
Supplement
It will return to ARMS setting screen (4/4) without
changing the settings when you press the
POSITION (? ) key (CANCEL).
CAUTION
This function performs cutting after the registration
mark is scanned. If a cutter is used as the tool, it
may harm the plotter.
Supplement
l Print the "T est Pattern 1" to test MARK TYPE 1,
and "T est Pattern 2" to test MARK TYPE 2.
l Standard registration mark is inside the "ARMS
T est Files" folder of the accessory CD.
Registration
Mark Format
MARK TYPE 1 pdf
MARK TYPE 2 pdf
Supplement
See "Loading Media (Paper or Marking Film)"
P .2-6 for loading the media.
File
File Name
ARMStest_type1.pdf
eps ARMStest_type1.eps
ARMStest_type2.pdf
eps ARMStest_type2.eps