Aligning the Push Rollers
This section describes how to alignment of the push rollers.
Standby of the Push Roller
the FC8000-100/130/160 models, the number of push rollers required to hold down the media varies
according to the width of the loaded media. Be sure to move a push roller that is not used to the standby
position so that it does not affect the cutting or plotting operation.
Aligning the Push Roller
the left and right push rollers to correspond with the width of the media. Adjust the push rollers so
that they are positioned above both the media and the grit rollers. Position the push rollers within the grit roller
position stickers ensures that they are above the grit rollers.
T o move the push rollers, the media set lever must be in the lowered position.