GRAPHTEC FC8000 Series User Manual page 172

Press the [1] key (ON) or the [2] key (OFF).
5
AUTO PRE FEED is selected and return to AUTO PRE FEED screen.
Press the [2] key (FEED LENGTH).
6
FEED LENGTH setting screen is displayed.
Press the POSITION (¡ã¡å ) key and increase or decrease the
7
setting value.
Confrm the setting value, and press the POSITION (? ) key
8
(PREVIOUS).
FEED LENGTH is selected and return to AUTO PRE FEED
screen.
Confrm the setting and press the [ENTER] key.
9
Setting will be set, and it will return to MEDIA SETTINGscreen (1/2).
Press the [MENU] key.
10
It will return to default screen.
Supplement
It will return to TOOL setting screen without
changing the settings when you press the
POSITION (? ) key (PREVIOUS). Digits of the
setting can be changed by pressing the [FAST]
key.
Supplement
Feed length can be set in 0.1 m units.
POSITION
Setting range is 1.0 m to 50.0 m.
POSITION
Supplement
It will return to MEDIA SETTING screen (1/2)
without changing the settings when you press the
POSITION (? ) key (PREVIOUS).
Supplement
[Pr] mark is displayed at the right of the screen
when AUTO PRE FEED is set. See "How to Use
Control Panel"
8-5
P .2-17
.