Interface Setting Menu; Connecting With Network (Lan) - GRAPHTEC FC8000 Series User Manual

Interface Setting Menu

of the interface condition is only necessary when the plotter is connected using network (LAN) or RS-
Setting
232C cables.
It is not necessary when the plotter is connected using the USB cable.
P .9-3

Connecting with Network (LAN)

P .9-6 Connecting with RS-232C
Connecting with Network (LAN)
Operation
Press the [MENU] key in the default screen.
1
MENU screen is displayed.
Press the POSITION (¡ã ) key.
2
INTERFACEsetting screen (1/3) is displayed.
Press the POSITION (¡å ) key.
3
INTERFACEsetting screen (2/3) is displayed.
Press the [2] key (LAN).
4
LAN setting screen is displayed.
Next page
POSITION
Supplement
POSITION
LAN setting is available only when the network
(LAN) interface (factory-installed option) is
installed.
Supplement
l It will return to INTERFACE setting screen (2/3)
without changing the settings when you press
the POSITION (? ) key (CANCEL).
MAC address is displayed when the POSITION
l
(? ) key is pressed.
9-3