Press the [3] key (WIDTH).
7
WIDTH setting screen is displayed.
* Display may vary depending on the selected tool condition number.
Press the POSITION (¡ã¡å ) key and increase or decrease the
8
setting value.
Confrm the setting and press the [ENTER] key (SET).
9
Setting will be set, and it will return to CONDITION screen (1/3).
Press the [CONDITION] key.
10
It will return to default screen.
Supplement
It will return to CONDITION screen (1/3) without
POSITION
changing the settings when you press the
POSITION (? ) key (CANCEL).
14-6