GRAPHTEC FC8000 Series User Manual page 262

15 -
4
Supplies
Item
Cutter plunger
Cutter blade
Water-based fbertip pen
Oil-based ballpoint pen
Oil-based ballpoint pen
plunger
Disposable ink pen (black)
Ink pen plunger
Cross cut blade
Model
PHP32-CB09N-HS
PHP32-CB15N-HS
PHP31-CB09-HS
PHP31-CB15-HS
PHP31-CB15B-HS
CB09UA-5
CB15U-5
CB15U-5SP
CB15UA-2
CB15U-K30-5
CB15U-K30-5SP
CB15UA-K30-2
CB15UB-2
CB15U-K20-2SP
KF550 Series
KB130, 140 Series
PHP31/32/33-BALL
SD Series 0.2 to 0.5 mm
diameter
PHP32/33/34-INK
CT01H
CT02U
15-9
Contents
Used with Ô0.9 mm diameter cutter blades
(CB09UA-5)
Used with Ô1.5 mm diameter cutter blades,
has a built-in spring
Used with Ô0.9 mm diameter cutter blades
(CB09UA-5)
Used with Ô1.5 mm diameter cutter blades,
comes with one tube of grease
Used with Ô1.5 mm diameter cutter blades
(CB15U-5SP , CB15U-K30-5SP , CB15U-K20-
2SP)
Ô0.9 mm diameter, supersteel blade, comes
with a spring, for cutting general flm (set of 5)
Ô1.5 mm diameter, supersteel blade, for
cutting slightly thick flm (set of 5)
Ô1.5 mm diameter, supersteel blade, comes
with a spring (set of 5)
Ô1.5 mm diameter, supersteel blade, for
cutting high-intensity refective flm (set of 2)
Ô1.5 mm diameter, supersteel blade, for
cutting thick materials (set of 5)
Ô1.5 mm diameter, supersteel blade, comes
with a spring (set of 5)
Ô1.5 mm diameter, supersteel blade, for
cutting high-intensity refective flm (set of 2)
Ô1.5 mm diameter, supersteel blade, for
cutting small text (set of 2)
For cutting sandblast rubber (set of 2)
Ultra-hard blade