Setting The Display Length Unit (Length Unit) - GRAPHTEC FC8000 Series User Manual

Setting the Display Length Unit (LENGTH UNIT)

This function enables you to set the unit for coordinates appearing on the display panel to either millimeter or
inch units.
Operation
Press the [MENU] key in the default screen.
1
MENU screen is displayed.
Press the POSITION (¡å ) key (ADV .).
2
ADVANCE setting screen (1/3) is displayed.
Press the [3] key (LENGTH UNIT).
3
LENGTH UNIT setting screen is displayed.
Press the [1] key (METRIC) or the [2] key (INCH).
4
Confrm the setting and press the [ENTER] key (SET).
5
Setting will be set, and it will return to ADVANCE setting screen (1/3).
Press the [MENU] key.
6
It will return to the default screen.
POSITION
10-3