GRAPHTEC FC8000 Series User Manual page 184

Repeat steps 3 to 5 and select the 4 values to be set.
5
Confrm the setting and press the [4] key (PREVIOUS).
6
IP ADDRESSwill be set, and it will return to LAN setting screen.
Press the [3] key (SUBNET MASK).
7
SUBNET MASK setting screen is displayed.
Press the POSITION (? ? ) key, and select the value to be set.
8
Press the POSITION (¡ã¡å ) key, and increase or decrease the
9
values in the digits to be set.
Repeat steps 8 to 9 and select the 4 values to be set.
10
Confrm the setting and press the [4] key (PREVIOUS).
11
SUBNET MASK will be set, and it will return to LAN setting screen.
Press the [4] key (GATEWAY).
12
GATEWAY setting screen is displayed.
Press the POSITION (? ? ) key, and select the value to be set.
13
Press the POSITION (¡ã¡å ) key, and increase or decrease the
14
values in the digits to be set.
Repeat steps 13 to 14 and select the 4 values to be set.
15
Confrm the setting and press the [4] key (PREVIOUS).
16
GATEWAY will be set, and it will return to LAN setting screen.
Confrm the setting and press the [ENTER] key (SET).
17
Setting will be set, and it will return to INTERFACEsetting screen (2/3).
Next page
Supplement
Digits of settings can be changed by pressing
the [FAST] key.
POSITION
Supplement
Digits of settings can be changed by pressing
POSITION
the [FAST] key.
POSITION
Supplement
Digits of settings can be changed by pressing
POSITION
the [FAST] key.
9-5