Setting The Tool Number - GRAPHTEC FC8000 Series User Manual

Setting the Tool Number

Set the tool that is used in each of the tool condition numbers. (Setting range: 1 to 3)
Operation
Press the [CONDITION] key in the default screen.
1
CONDITION setting screen (1/3) is displayed.
Press the POSITION (¡å ) key.
2
CONDITION setting screen (2/3) is displayed.
Press the [3] key (ASSIGN TOOL).
3
ASSIGN TOOL setting screen is displayed.
* Display may vary depending on the mounted tool.
Press the POSITION (? ? ) key and select the tool condition
4
number (CONDITION No.).
Next page
POSITION
Supplement
It will return to CONDITION screen (2/3) without
changing the settings when you press the [4] key
(CANCEL).
Supplement
l T ool number and attached position
POSITION
TOOL 1: When using the tool attached in
TOOL 2: When using the tool attached on the tool
TOOL 3: When using the tool attached in forward
l Attaching methods of the tool
See "Attaching a T ool"
Assignment (Switching the T ools)"
2-32
For half cutting (backward)
For c utting out (forward)
backward position of the tool folder
station with the 2 pen option
position of the tool holder
P .2-4 and "2-Pen
P .14-7 .