Safety Precautions - GRAPHTEC FC8000 Series User Manual

Do not touch the rollers or moving parts such as
the carriage while cutting or plotting is in progress.
l Such action may result in injury.
Do not touch
Keep your hands, hair, etc., away from the rollers
or moving parts such as the carriage even if the
plotter is stopped, as it may suddenly start moving
when data is received.
l Such action may result in injury.
Keep your distance
Do not connect the plotter to a non-rated power
supply.
l Such action may cause electric shock or a fre hazard due
to current leakage.
Prohibited
If the plotter generates smoke, overheats, emits a
strange odor, or otherwise functions abnormally,
do not continue using it. Turn off the power and
unplug the power cord from the electrical socket.
Use of the plotter in such a condition may result in a fre
l
hazard or electric shock.
l After confrming that smoke is no longer being emitted,
contact your sales representative or nearest Graphtec
vendor for repairs.
Never attempt to perform
l
repairs yourself. Repair work
by inexperienced personnel is
extremely dangerous.
Prohibited

Safety Precautions

WARNING
Be sure to ground the earth terminal.
l If the plotter is not grounded, the operator could suffer an
electric shock in the event of current leakage.
Ground the plotter
Do not disassemble, repair, or remodel the plotter.
l Such action may cause electric shock or a fre hazard due
to current leakage.
Contact with the high-voltage parts within the plotter may
l
cause electric shock.
l If the plotter requires repairs,
contact your sales representative
or nearest Graphtec vendor.
No disassembly
Do not use the plotter in a location where it will be
exposed to water, rain, or snow.
l Such action may cause electric shock or a fre hazard due
to current leakage.
Avoid water
Do not allow dust or metal scraps to adhere to the
power plug.
l Such action may cause electric shock or a fre hazard due
to current leakage.
Prohibited
Beware of
electric shock
Beware of
electric shock