Download Print this page

GRAPHTEC FC8000 Series User Manual: Related To Gp-gl Command; Setting The Step Size (step Size)

Cutting pro.
Hide thumbs

Advertisement

Related to GP-GL Command

can be changed only when the GP-GL command is enabled in the COMMAND.
This

Setting the Step Size (STEP SIZE)

The distance to travel with 1 step can be changed. Match the setting value of the application to be used.
Operation
Press the [MENU] key in the default screen.
1
MENU screen is displayed.
Press the POSITION (¡ã ) key (I/F).
2
INTERFACEsetting screen (1/3) is displayed.
Press the [4] key (STEP SIZE).
3
GP-GL STEPSIZE setting screen is displayed.
Press the [1] key (0.100 mm), the [2] key (0.050 mm), the [3]
4
key (0.025 mm), or the [4] key (0.010 mm).
Confrm the setting and press the [ENTER] key (SET).
5
Setting will be set, and it will return to INTERFACEsetting screen (1/3).
Press the [MENU] key.
6
It will return to the default screen.
POSITION
11-5

Advertisement

Troubleshooting

   Also See for GRAPHTEC FC8000 Series

   Related Manuals for GRAPHTEC FC8000 Series

Comments to this Manuals

Symbols: 0
Latest comments:
  • vincent cirillo Apr 28, 2016 12:49:
    HOW TO CHANGE CENTIMETER MEASURING UNITS TO INCHES MEASURING UNITS ON A GRAPHTEC FC 8000 SERIES PLOTTER