Download Print this page

GRAPHTEC FC8000 Series User Manual Page 144

Cutting pro.
Hide thumbs

Advertisement

Press the [2] key (NUMBER OF POINTS).
14
NUMBER OF POINTS setting screen is displayed.
Press the [1] key (2POINT), the [2] key (3POINT), or the [3] key
15
(4POINT).
POINTS is selected and it will return to MARK SCAN MODE screen.
Confrm the setting and press the [ENTER] key (SET).
16
Setting will be set, and it will return to ARMS setting screen (1/4).
Press the [MENU] key.
17
ARMS SETTINGscreen (1/4) is displayed.
Press the [2] key (MANUAL READ MARKS).
18
Following message is displayed.
Press the POSITION (¡ã¡å ? ? ) key and move the tool to the
19
position of the adjustment mark specifed by the message.
Confrm the position of the tool, and if it is OK, press the [ENTER]
20
key.
Once all the adjustment marks are specified, DISTANCE entry screen is
displayed.
Next page
Supplement
It will return to MARK SCAN MODE screen
without changing the settings when you press the
POSITION (? ) key (CANCEL).
Supplement
It will return to ARMS setting screen (1/4) without
changing the settings when you press the
POSITION (? ) key (CANCEL).
Supplement
T ool carriage will move faster when the [FAST] key
is pressed simultaneously with the POSITION key.
POSITION
Supplement
Repeat steps 14 and 15 if following message
l
prompting to move to the adjustment mark is
displayed.
l
Number to repeat steps 14 and 15 differs
depending on the specifed number of the
adjustment marks. Follow the message that is
displayed.
It will return to ARMS setting screen (1/4)
l
without scanning when the [4] key (CANCEL) is
pressed.
6-5

Advertisement

Troubleshooting

   Also See for GRAPHTEC FC8000 Series

   Related Manuals for GRAPHTEC FC8000 Series

Comments to this Manuals

Symbols: 0
Latest comments:
  • vincent cirillo Apr 28, 2016 12:49:
    HOW TO CHANGE CENTIMETER MEASURING UNITS TO INCHES MEASURING UNITS ON A GRAPHTEC FC 8000 SERIES PLOTTER