GRAPHTEC FC8000 Series User Manual page 118

Press the [4] key (AXIS ORIGIN OFFSET).
4
AXIS ORIGIN OFFSETscreen is displayed.
Press the [1] key (X).
5
X AXIS setting screen is displayed.
Press the POSITION (¡ã¡å ) key and increase or decrease the
6
setting value.
Confrm the setting and press the POSITION (? ) key
7
(PREVIOUS).
Offset value will be selected, and it will return to AXIS ORIGIN
OFFSETmode screen.
Press the [2] key (Y).
8
Y AXIS setting screen is displayed.
Press the POSITION (¡ã¡å ) key and increase or decrease the
9
setting value.
Confrm the setting and press the POSITION (? ) key
10
(PREVIOUS).
Offset value will be selected, and it will return to AXIS ORIGIN
OFFSETmode screen.
Confrm the setting and press the [ENTER] key (SET).
11
Setting will be set, and it will return to ARMS setting screen (2/4).
Press the [MENU] key.
12
It will return to default screen.
Supplement
It will return to ARMS setting screen (2/4) without
changing the settings when you press the
POSITION (? ) key (CANCEL).
Supplement
l Digits of settings can be changed by pressing
POSITION
the [FAST] key.
l Setting range is from -1000.0 to +1,000.0mm.
POSITION
Supplement
l Digits of settings can be changed by pressing
POSITION
the [FAST] key.
l Setting range is from -1,000.0 to +1,000.0mm.
POSITION
Supplement
It will return to ARMS setting screen (2/4) without
changing the settings when you press the
POSITION (? ) key (CANCEL).
5-17