GRAPHTEC FC8000 Series User Manual page 187

Press the [1] key (RS-232C).
4
RS-232C setting screen is displayed.
Press the [1] key (BAUD RATE).
5
BAUD RATE setting screen is displayed.
Press the POSITION (¡ã¡å ) key and increase or decrease the
6
setting value.
Confrm the setting and press the POSITION ( ? ) key
7
(PREVIOUS).
BAUD RATE will be set, and it will return to RS-232C setting
screen (2/3).
Press the [2] key (DATA BIT).
8
DATA BIT setting screen is displayed.
Press the [1] key (8 BIT) or the [2] key (7 BIT).
9
DATA will be set, and it will return to RS-232C setting screen (2/3).
Press the [3] key (PARITY).
10
PARITY setting screen is displayed.
Press the [1] key (NONE), [2] key (EVEN), or the [3] key (ODD).
11
PARITY will be set, and it will return to RS-232C setting screen.
Next page
Supplement
It will return to INTERFACE setting screen (2/3)
without changing the settings when you press the
POSITION (? ) key (CANCEL).
Supplement
Match the setting value of the application to be
POSITION
used.
POSITION
Supplement
l Match the setting value of the application to be
used.
l It will return to RS-232C setting screen
without changing the settings when you press
POSITION (? ) key (PREVIOUS).
Supplement
l Match the setting value of the application to be
used.
l It will return to RS-232C setting screen
without changing the settings when you press
POSITION (? ) key (PREVIOUS).
9-8