Self Diagnostic Test - GRAPHTEC FC8000 Series User Manual

13 -
5

Self Diagnostic Test

Operation status can be tested by self diagnostic test by operating the sensors and switches following the
instruction on the screen.
Supplement
Diagnostic test can be performed only right after the power is turned on. DIAGNOSTICS cannot be selected from the menu once any operation,
such as loading media, is performed.
Operation
Confrm that the power is turned off.
1
Turn the power on without loading the media.
2
Press the [MENU] key once the default screen is displayed.
3
MENU screen is displayed.
Press the POSITION (? ) key (TEST).
4
TESTmenu screen is displayed.
Press the [4] key (DIAGNOSTICS).
5
DIAGNOSTICS start screen is displayed.
Press the [1] key (CONTINUE).
6
Messages for testing are displayed on the screen.
Next page
POSITION
13-21