Detect the Registration Mark for Adjustment on the Media and Enter the
Method to enter the adjustment value, which is the difference between the scanned registration mark on the
media and the cutting position, is described here.
Plot the registration mark before going to following steps if there is no registration mark written on the media. See "Adjust After Plotting the
Adjustment Registration Mark"
Load the media with adjustment registration mark in the plotter.
Press the [MENU] key.
MENU screen is displayed.
Press the  key (ARMS).
ARMS SETTINGscreen (1/4) is displayed.
Press the POSITION (¡å ) key twice.
ARMS SETTINGscreen (3/4) is displayed.
Press the  key (SENSOR OFFSET ADJ.).
SENSOROFFSETADJ. setting screen is displayed.
to plot registration marks.
See "Loading Media (Paper or Marking Film)"
It will return to ARMS setting screen (3/4) without
changing the settings when you press the
POSITION (? ) key (CANCEL).
for loading the media.