Main Specifications - GRAPHTEC FC8000 Series User Manual

15 -
2

Main Specifications

CPU 32bit CPU
Confguration Grit-rolling plotter
Drive Digital servo
Max. Cut Area 50 m x 610 mm
(expanded mode) (expanded mode)
Guaranteed
precision
cutting
area *1
Mountable
media
width
Max. cutting
speed
Specifable
speeds
Cutting
Pressure
Min. character 3 mm (0.125 in.) alphanumeric Helvetica med. Font
size
Mechanical
resolution
Program
mable
resolution
Repeatable
accuracy *1
Number of
cutters/pens
Pen types
Pouncing tool Pouncing tool: PPA33-TP12, 1.2-mm pin diameter)
type
Compatible
media
Compatible
paper for
pouncing
Interface
Buffer
memory
Resident
command
sets
LCD display
Power supply
Power
consumption
Operating
environment
FC8000-60 FC8000-75
50 m x 762 mm
15 m x 590 mm 15 m x 742 mm
Max: 730 mm Max: 901 mm
Min: 50 mm Min: 50 mm
148.5 cm/s (45°direction)
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80, 90, 100, 105 cm/s
48 steps, 0.196 to 5.88 N (20 to 600 gf)
0.005 mm
GP-GL: 0.1/0.05/0.025/0.01 mm, HP-GL : 0.025 mm
Max. 0.1 mm/in unit of 2 m (excluding media shrinkage)
1 (2 for 2-pen model ) *3
Water-based fber-tip, oil-based ballpoint, and disposable ink pens
Mono-vinyl chloride media, fuorescent media, and refective media up to 0.25 mm thick, high
refective media. *5
Regular paper from 0.06 to 0.13 mm thick
USB2.0 (Full Speed)/Network (Ethernet 10BASE-T/100BASE-TX) /
RS-232C (Auto switching)
2 MB
GP-GL/HP-GL (Control panel switching) *2
Graphic type (Y ellow backlight)
100-240VAC/50-60 Hz (Auto switching)
160VA max.
10 to 35º C, 35 to 75% R.H. (non-condensing)
FC8000-100 FC8000-130
50 m x 1067 mm 50 m x 1372 mm
(expanded mode) (expanded mode)
10 m x 1047 mm 10 m x 1352 mm
15 m x 894 mm 15 m x 894 mm
Max: 1206 mm Max: 1511 mm
Min: 50 mm Min: 50 mm
*2
*4
15-6
FC8000-160
50 m x 1626 mm
(expanded mode)
10 m x 1606 mm
15 m x 894 mm
Max: 1765 mm
Min: 50 mm
*3