Setting The Force - GRAPHTEC FC8000 Series User Manual

Setting the Force

Set the cutting force that is used in each of the condition numbers. (Setting range: 1 to 48)
Operation
Press the [CONDITION] key in the default screen.
1
CONDITION setting screen (1/3) is displayed.
Press the [4] key (FORCE).
2
FORCE setting screen is displayed.
* Display may vary depending on the selected condition number.
Press the POSITION (? ? ) key and select the condition number
3
(CONDITION No.).
Press the POSITION (¡ã¡å ) key and increase or decrease the
4
setting value.
Confrm the setting and press the [ENTER] key (SET).
5
Setting will be set, and it will return to CONDITION screen (1/3).
Press the [CONDITION] key.
6
It will return to the default screen.
Supplement
It will return to CONDITION screen (1/3) without
changing the settings when you press the [4] key
(CANCEL).
Supplement
Guideline to set force
POSITION
See "Setting the T ool Condition"
POSITION
2-29
P .2-24 .