Priority Of Tool Condition Selection (Condition Priority) - GRAPHTEC FC8000 Series User Manual

Priority of Tool Condition Selection (CONDITION PRIORITY)

Select the priority of the setting created by different method when the tool condition is set.
All the tool condition that is received from the computer will be ignored, and only the setting and change of the
tool condition from the control panel is accepted when MANUAL is selected. This setting set here is maintained
even if the power is turned off.
On the other hand, it will set the most current tool condition either from the control panel or from the software
when PROGRAM is selected. The values set from the control panel is maintained, and the values set from the
software is erased when the power is turned off.
Operation
Press the [MENU] key in the default screen.
1
MENU screen is displayed.
Press the [1] key (TOOL).
2
TOOLS SETTINGscreen (1/3) is displayed.
Press the POSITION (¡å ) key.
3
TOOLS SETTINGscreen (2/3) is displayed.
Press the [4] key (CONDITION PRIORITY).
4
CONDITION PRIORITYsetting screen is displayed.
Press the [1] key (MANUAL) or the [2] key (PROGRAM).
5
Confrm the setting and press the [ENTER] key (SET).
6
Setting will be set, and it will return to TOOLS SETTINGscreen (2/3).
Press the [MENU] key.
7
It will return to default screen.
POSITION
11-3