Setting Of The Cross Cut Force - GRAPHTEC FC8000 Series User Manual

Setting of the Cross Cut Force

will adjust the blade force when it cross cuts.
This
Setting range of cross cut force is from 1 to 48. The force will be larger with larger value. It is set to 30 as a
default.
Decrease the value if the media is thin, and increase the value if the media is thick.
Operation
Press the [MENU] key.
1
MENU screen is displayed.
Press the [4] key (MEDIA).
2
MEDIA SETTINGscreen (1/2) is displayed.
Press the POSITION (¡å ) key.
3
MEDIA SETTINGscreen (2/2) is displayed.
Press the [2] key (CROSS CUT FORCE).
4
CROSS CUT FORCE setting screen is displayed.
Press the POSITION (¡ã¡å ) key and increase or decrease the
5
setting value.
Confrm the setting and press the [ENTER] key (SET).
6
Setting will be set, and it will return to MEDIA setting screen (2/2).
Press the [MENU] key.
7
It will return to default screen.
POSITION
Supplement
Decrease the value of cross cut force if the media
is thin, and increase the value if the media is thick.
· Range of cross cut force values: 1-48
· Default value: 30
POSITION
Supplement
It will return to MEDIA setting screen (2/2) without
changing the setting values when you press the
POSITION (? ) key (CANCEL).
3-17