Download Print this page

GRAPHTEC FC8000 Series User Manual: Setting Speed Of The Registration Mark Scan

Cutting pro.
Hide thumbs

Advertisement

Setting Speed of the Registration Mark Scan

of the tool carriage and media to scan the registration mark is set.
Speed
It may not scan the registration marks or the difference may become large when the speed is too high, but the
cutting time becomes longer when the speed is too slow. Adjust the setting value considering the balance.
It is normally set to "NORMAL",but the scanning might improve when it is set to "SLOW"in cases where the
registration marks cannot be scanned or the difference is too big.
Operation
Press the [MENU] key.
1
MENU screen is displayed.
Press the [2] key (ARMS).
2
ARMS SETTINGscreen (1/4) is displayed.
Press the POSITION (¡ã ) key.
3
ARMS SETTINGscreen (4/4) is displayed.
Press the [2] key (SENSING SPEED).
4
SENSING SPEEDadjusting screen is displayed.
Press the [1] key (SLOW) or the [2] key(NORMAL).
5
Confrm the setting and press the [ENTER] key (SET)
6
Setting will be set, and it will return to ARMS setting screen (4/4).
Press the [MENU] key.
7
It will return to default screen.
POSITION
Supplement
It will return to ARMS setting screen (4/4) without
changing the settings when you press the
POSITION (? ) key (CANCEL).
5-23

Advertisement

Troubleshooting

   Also See for GRAPHTEC FC8000 Series

   Related Manuals for GRAPHTEC FC8000 Series

Comments to this Manuals

Symbols: 0
Latest comments:
  • vincent cirillo Apr 28, 2016 12:49:
    HOW TO CHANGE CENTIMETER MEASURING UNITS TO INCHES MEASURING UNITS ON A GRAPHTEC FC 8000 SERIES PLOTTER