GRAPHTEC FC8000 Series User Manual page 161

Press the [1] key.
4
CONDITION No. selection screen is displayed.
Press the POSITION (¡ã¡å ) key and select the CONDITION No.
5
Confrm the setting value, and press the POSITION (? ) key
6
(PREVIOUS).
CONDITION No. is selected and return to CUT LINE PATTERN
setting screen.
Press the [2] key (TYPE No.).
7
TYPENo. setting screen is displayed.
Press the POSITION (¡ã¡å ) key and select the TYPE No. .
8
Confrm the setting value, and press the POSITION (? ) key
9
(PREVIOUS).
TYPENo. is selected and return to CUT LINE PATTERN setting
screen.
Press the POSITION (? ) key (UP MODE).
10
UP MODE setting screen is displayed.
Next page
POSITION
POSITION
POSITION
Supplement
l CUT L and UP L is displayed when the TYPE
POSITION
No. 0-7 is selected. Also, you will be able to set
the UP MODE.
l Setting for all becomes enabled when USER is
selected.
l Nothing will be displayed when OFF is selected.
Supplement
POSITION
Setting range is from 1 to 48, and "UP".
7-16