Press the POSITION (¡å ) key twice.
ARMS SETTIN g screen (3/4) is displayed.
Press the  key (SENSOR OFFSET ADJ.).
SENSOR OFFSET ADJ. setting screen is displayed.
Press the  key (TEST PATTERN).
Following message is displayed.
Press the POSITION (¡ã¡å ? ? ) key and move the tool carriage
to the position to plot the registration mark (position nothing is
Press the [ENTER] key.
Registration mark is plotted.
Confrm that the tool is at the position shown in the left image,
and press the [ENTER] key.
It will read the registration mark, and then plot the registration mark for
comparison. It will return to SENSOR OFFSET ADJ. screen once the plotting
Align the tool to this area
Distance adjustment value Y
It will return to ARMS setting screen (3/4) without
changing the settings when you press the
POSITION (? ) key (CANCEL).
It will return to SENSOR OFFSET ADJ. screen
without plotting by pressing the  key (CANCEL).
Registration mark for adjustment