Download Print this page

GRAPHTEC FC8000 Series User Manual Page 4

Cutting pro.
Hide thumbs

Advertisement

Do not use the power cord if it is damaged.
l
Use of a damaged cord may result in electric shock or a
fre hazard due to current leakage.
Replace the power cord with a new one.
l
Unplug the power
cord from the socket
Do not use or store the plotter in a location
exposed to direct sunlight or the direct draft of an
air conditioner or heater.
l
Such locations may impair the
performance of the plotter.
Prohibited
Do not place any receptacle containing water or
other fuid on top of the plotter.
Fluid falling inside the plotter may cause electric shock or
l
a fre hazard due to current leakage.
Beware of
Avoid water
electric shock
When disconnecting the power cord or interface
cable, do not pull on the cord/cable.
l
Such action will damage the cord/cable, resulting in a fre
hazard or electric shock.
Prohibited
Safety Precautions
WARNING
Be careful when handling the cutter blade.
l
T ouching the blade with your bare hand may cause injury.
l
Do not touch the cutter blade while cutting is in progress.
Do not touch
Safety Precautions
CAUTION
Do not use the plotter in an excessively dusty or
humid location.
Such locations may impair the performance of the plotter.
l
Prohibited
Do not use the plotter in a location subject to
excessive mechanical vibration or electrical noise.
Such locations may impair the performance of the plotter.
l
Prohibited
If water or foreign matter enters the plotter,
discontinue use. Turn off the power and unplug the
power cord from the electrical socket.
Use of a damaged cord may result in electric shock or a
l
fre hazard due to current leakage.
l
Contact your sales representative or nearest Graphtec
vendor for repairs.
Unplug the power
cord from the socket

Advertisement

Troubleshooting

   Also See for GRAPHTEC FC8000 Series

   Related Manuals for GRAPHTEC FC8000 Series

Comments to this Manuals

Symbols: 0
Latest comments:
  • vincent cirillo Apr 28, 2016 12:49:
    HOW TO CHANGE CENTIMETER MEASURING UNITS TO INCHES MEASURING UNITS ON A GRAPHTEC FC 8000 SERIES PLOTTER