Table of Contents
Advertisement
Power cord
Local user
.
Figure 2.3: Basic LCM2 appliance configuration
Connecting a CO cable to each target device
To connect a CO cable to a target device, complete the following steps:
1.
Attach the color-coded connectors of the CO cable to the keyboard, monitor, and mouse ports
on the first target device that you connect to the appliance.
2.
Attach one end of the Cat5 cable to the RJ-45 connector on the CO cable.
3.
If the cable is a KCO or UCO, attach a terminator to the other RJ-45 connector on the CO
cable.
4.
Connect the other end of the Cat5 cable to an ARI port on the rear of the LCM2 appliance.
5.
Repeat steps 1 to 4 for all target devices that you are attaching.
Ethernet
Configuration port
ACI port
Target device
Target device
Chapter 2: Installation
ARI ports
CO cables
11
Advertisement
Table of Contents
