Drtty Decode Set Mode; Rtty Decode Usos; Rtty Decode New Line Code - Icom IC-7600 Instruction Manual

4
RECEIVE AND TRANSMIT
D RTTY decode set mode
This set mode is used to set the decode USOS
function, time stamp setting, etc.
• Setting contents
q During the RTTY mode operation, push [DECODE]
(F-3) to select the RTTY decode screen.
w Push [<MENU1>] (F-1) to select the second RTTY
decode menu, then push [SET] (F-5) to select the
RTTY decode set mode.
• Push [WIDE] (F-6) to toggle the screen size between
normal and wide.
e Push [Y] (F-1) or [Z] (F-2) to select the desired
set item.
r Set the desired condition using the main dial.
• Hold down [DEF] (F-4) for 1 second to select a default
condition or value.
• Push [Ω ≈] (F-3) to select the set contents for some
items.
t Push [EXIT/SET] to exit from the set mode.
RTTY FFT Scope Averaging
Select the FFT scope waveform averaging function
from 2 to 4 and OFF. (default: OFF)
RTTY FFT Scope Waveform Color
Set the color for the FFT scope waveform.
• The color is set in RGB format.
• The set color is shown in the box beside the RGB
scale.

RTTY Decode USOS

Turn the capability of letter code decoding after
receiving a "space" (USOS: UnShift On Space
function) ON or OFF.

RTTY Decode New Line Code

Selects the new line code of the internal RTTY
decoder.
CR: Carriage Return, LF: Line Feed
RTTY Diddle
Selects the diddle condition.
55
DEF
F-1 F-2 F-3 F-4
F-1 F-3
<MENU1> DECODE
• RTTY decode set mode screen
OFF
Recommendation!
If you use the FFT scope waveform for tuning,
the default or smaller averaging setting is
recommended.
51
• Push [Ω ≈] (F-3) to select R (Red), G (Green) and
B (Blue), and then rotate the main dial to set the
ratio from 0 to 255.
ON
• ON : Decode as a letter code.
• OFF : Decode as a character code.
CR,LF,CR+LF
• CR,LF,CR+LF : Makes a new line with any codes.
• CR+LF : Makes a new line with CR+LF
code only.
BLANK
• OFF : Turns the diddle function OFF.
• BLANK : Transmits blank code during no code
transmission.
• LTRS : Transmits letter code during no code
transmission.
SET WIDE
F-5 F-6
Main dial
EXIT/SET
153 255