D Rtty Decode Set Mode - Icom IC-7600 Instruction Manual

4
RECEIVE AND TRANSMIT

D RTTY decode set mode

Ths set mode s used to set the decode USOS func-
ton, tme stamp settng, etc.
• Setting contents
q Durng RTTY mode operaton, push [DECODE] (F-3)
to select RTTY decode screen.
w Push [<MENU1>] (F-1) to select the second RTTY
decode menu, then push [SET] (F-5) to select
RTTY decode set mode.
• Push [WIDE] (F-6) to toggle the screen sze from nor-
mal and wde.
e Push [Y] (F-1) or [Z] (F-2) to select the desred
set tem.
r Set the desred condton usng the man dal.
• Push and hold [DEF] (F-4) for 1 sec. to select a default
condton or value.
• Push [Ω ≈] (F-3) to select the set contents for some
tems.
t Push [EXIT/SET] to ext from set mode.
RTTY FFT Scope Averaging
Select the FFT scope waveform averagng functon
from 2 to 4 and OFF. (default: OFF)
RTTY FFT Scope Waveform Color
Set the color for the FFT scope waveform.
• The color s set n RGB format.
• The set color s ndcated n the box besde the RGB
scale.
RTTY Decode USOS
Turn the capablty of letter code decodng after
recevng a "space" (USOS; UnShft On Space func-
ton) ON and OFF.
RTTY Decode New Line Code
Selects the new lne code of the nternal RTTY
decoder.
CR: Carrage Return, LF: Lne Feed
RTTY Diddle
Selects the dddle condton.
51
DEF
F-1 F-2 F-3 F-4
F-1 F-3
<MENU1> DECODE
• RTTY decode set mode screen
OFF
Recommendation!
If you use the FFT scope waveform for tunng, use
of the default or smaller averagng settng s recom-
mended.
51
• Push [Ω ≈] (F-3) to select R (Red), G (Green) and
B (Blue), and then rotate the man dal to set the
rato from 0 to 255.
ON
• ON : Decode as letter code.
• OFF : Decode as character code.
CR,LF,CR+LF
• CR,LF,CR+LF : Makes new lne wth any codes.
• CR+LF : Makes new lne wth CR+LF code
only.
BLANK
• OFF : Turns the dddle functon OFF.
• BLANK : Transmts blank code durng no code
transmsson.
• LTRS : Transmts letter code durng no code
transmsson.
SET WIDE
F-5 F-6
Main dial
EXIT/SET
153 255