Switch Duplex - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.12.12 SWITCH DUPLEX

Removal
1. Remove the COVER LEFT. (p.353)
2. Remove the COVER TOP. (p.346)
3. Remove the PWBA DUPLEX. (p.347)
4. Remove the one screw (silver, 6mm) securing the HARNESS ASSY DUP
EARTH.
5. Remove the three screws (gold, tapping, 8mm) securing the BRACKET MOTOR
to the COVER HSG DUP.
6. Remove the SPRING LATCH installed between the LEVER LATCH LEFT and
BRACKET MOTOR.
7. Remove the BRACKET MOTOR mounted with the MOTOR DUPLEX and
SWITCH DUPLEX.
When removing the BRACKET MOTOR, be careful not to
C H E C K
mislay the gears installed to the COVER HSG DUP.
P O I N T
When removing the BRACKET MOTOR, be careful not to
mislay the SPRING LATCH installed between the LEVER
LATCH LEFT and BRACKET MOTOR as the SPRING
LATCH comes off.
8. Disconnect the HARNESS ASSY DUP COVER from the connector (P/J52) of the
SWITCH DUPLEX.
9. Disengage the hooks of the SWITCH DUPLEX, and remove the SWITCH
DUPLEX from the BRACKET MOTOR.
Disassembly and Assembly
6)
4)
5)
8)
SWITCH DUPLEX
Figure 4- 155. SWITCH DUPLEX Removal
Option Duplex
HARNESS ASSY DUP COVER
HARNESS ASSY DUP EARTH
7)
COVER HSG DUP
SPRING LATCH
BRACKET MOTOR
Revision C
JG3617AB
357
Confidential