Epson EPL-N3000 Service Manual page 235

EPSON EPL-N3000/AcuLaser M4000N
Installation
1. Move the GUIDE TRAY RIGHT in the direction opposite to the arrow, and secure
it with the one screw (silver, 6mm).
When installing the GUIDE TRAY RIGHT, make sure that the
C A U T I O N
PLATEs CST LOCK are mounted as shown in the NOTE.
2. Return the printer body to the normal position.
3. Install the COVER FRONT. (p.172)
4. Install the COVER TOP, CONTROL PANEL. (p.170)
5. Install the 500 EXIT ASSY. (p.262)
6. Install the COVER EXIT 500. (p.261)
7. Install the COVER RIGHT. (p.168)
8. Install the COVER LEFT. (p.169)
9. Install the FUSER ASSY. (p.253)
10. Install the COVER REAR. (p.167)
Pay attention to the difference between the two types of screws and
C A U T I O N
use them at their correct positions respectively.
11. Install the COVER REAR 500. (p.270)
12. Install the Imaging Cartridge and Paper Cassette.
Disassembly and Assembly 550 Paper Feeder
Revision C
235
Confidential