EPSON EPL-N3000/AcuLaser M4000N
4.13.4 COVER OCT
Removal
1.
Remove the COVER REAR. (p.362)
2.
Remove the WEIGHT.
3.
Disengage the hinges at both ends of the FLAPPER L from the COVER OCT.
4.
Remove the LINK mounted to the FLAPPER L from the SHAFT FULL STACK.
5.
Disengage the hinges at both ends of the FLAPPER R from the COVER OCT.
6.
Remove the LINK mounted to the FLAPPER R from the ACTUATOR FULL
STACK.
7.
Remove the 2 rear screws (gold, tapping, 8mm) securing the COVER OCT to the
printer body.
8.
Remove the 2 bottom screws (gold, tapping, 8mm) securing the COVER OCT to
the printer body.
9.
Lift the TRAY ASSY OCT nearly 90 degrees, lift the COVER OCT upward
together with the TRAY ASSY OCT, and remove it from the printer body.
When lifting the COVER OCT, handle it carefully so that the
C A U T I O N
ACTUATOR FULL STACK is not damaged by the TRAY ASSY
OCT.
Disassembly and Assembly
FLAPPER L
ACTUATOR FULL STACK
8)
Figure 4- 160. COVER OCT Removal
Option OCT
LINK
4)
SHAFT FULL STACK
JG3823AA
FLAPPER L
HINGE
3)
COVER OCT
7)
9)
JG3804AB
Revision C
WEIGHT
2)
JG3821AB
364
Confidential