Duct Front, Fan Sub - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.7.2 DUCT FRONT, FAN SUB

Removal
1. Remove the COVER REAR 500. (p.270)
2. Remove the COVER REAR. (p.167)
3. Remove the COVER LEFT. (p.169)
4. Remove the COVER RIGHT. (p.168)
5. Remove the COVER EXIT 500. (p.261)
6. Remove the 500 EXIT ASSY. (p.262)
7. Remove the COVER TOP, CONTROL PANEL. (p.170)
8. Remove the COVER FRONT. (p.172)
9. Disconnect the connector (P/J270) of the FAN SUB from the HARNESS ASSY
LVPS.
10. Remove the three screws (silver, tapping with a collar, 8mm x1, gold, tapping,
8mm x2) securing the DUCT FRONT.
11. Move the DUCT FRONT mounted with the FAN SUB in the direction of the
arrow, and remove it from the frame.
12. Release the hook securing the FAN SUB to the DUCT FRONT, and remove the
FAN SUB.
Disassembly and Assembly
10)
Figure 4- 59. DUCT FRONT, FAN SUB Removal
HOOK
Figure 4- 60. DUCT FRONT, FAN SUB Removal
Xero
Revision C
10)
DUCT FRONT
11)
PLATE TIE FRONT
9)
JG3192AA
FAN SUB
12-2)
DUCT FRONT
JG3058AB
Confidential
241