Cover Top (Aculaser M4000N) - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.14.9 COVER TOP (AcuLaser M4000N)

Removal
1. Remove the HSG UPPER ASSY. (p.343)
2. Remove the COVER LEFT. (p.353)
3. Remove the COVER RIGHT. (p.354)
4. Remove the one screw (gold, tapping, 8mm) securing the COVER TOP to the
COVER HSG DUP.
5. Move the COVER TOP in the direction of the arrow to disengage the four hooks,
and remove the COVER TOP from the COVER HSG DUP.
Installation
1. Move the COVER TOP in the direction opposite to the arrow, install it to the
COVER TOP, and secure it with the four hooks.
When installing the COVER TOP, match its positioning holes with
C H E C K
the bosses of the COVER HSG DUP.
P O I N T
2. Secure the COVER TOP to the COVER HSG DUP with the one screw (gold,
tapping, 8mm).
3. Install the COVER RIGHT. (p.354)
When installing the COVER RIGHT, match its positioning holes
C H E C K
with the bosses of the COVER HSG DUP.
P O I N T
4. Install the COVER LEFT. (p.353)
5. Install the HSG UPPER ASSY. (p.343)
Disassembly and Assembly AcuLaser M4000N Unique Disassembly Procedures
5)
COVER HSG DUP
PWBA DUPLEX
Figure 4- 182. COVER TOP Removal
Revision C
COVER TOP
4)
JG3604AB
393
Confidential