Roll Assy Gear Nudger - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.5.4 ROLL ASSY GEAR NUDGER

Removal
1. Open the COVER OPEN.
2. Hold down the boss of the HOLDER LEFT on the rear side of the 150 FEEDER
ASSY, shift the HOLDER LEFT in the direction of the arrow, and release the
three hooks.
3. Remove the HOLDER LEFT from the SUPPORT NUDGER. At the same time,
the ACTUATOR NO PAPER comes off.
4. Release the hook of the ROLL ASSY NUDGER, and pull the ROLL ASSY
NUDGER out of the SHAFT NUDGER.
5. Release the hook of the ROLL ASSY GEAR NUDGER, and pull the ROLL
ASSY GEAR NUDGER out of the SHAFT NUDGER.
In removal, take care not to hold any rubber portion of the ROLL
C A U T I O N
ASSY NUDGER or ROLL ASSY GEAR NUDGER.
Disassembly and Assembly
UNDER VIEW
SUPPORT NUDGER
ACTUATOR NO PAPER
HOLDER
LEFT
LIFT UP
(BOSS)
Figure 4- 42. ROLL ASSY GEAR NUDGER Removal
150 Paper Feeder
ROLL ASSY GEAR NUDGER
ROLL ASSY NUDGER
A (SEE DETAILED VIEW)
HOLDER LEFT
DETAILED VIEW OF A
ACTUATOR NO PAPER HOOK
HOLDER
LEFT
HOOK
JG3033EA
Revision C
215
Confidential