Sensor No Paper - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.11.16 SENSOR NO PAPER

Removal
1. Remove the one screw mounting the HOLDER NO PAPER SENSOR.
2. Remove the HOLDER NO PAPER SENSOR from the Option 550 Paper Feeder.
3. Release the two hooks of the SENSOR NO PAPER, and remove the SENSOR NO
PAPER from the HOLDER NO PAPER SENSOR.
4. Disconnect the connector of the HARNESS ASSY CLSNR 1 from the connector
(P/J852) of the SENSOR NO PAPER.
Installation
1. Connect the connector (P/J852) of the HARNESS ASSY CLSNR 1 to the
connector of the SENSOR NO PAPER.
2. Install the SENSOR NO PAPER to the HOLDER NO PAPER SENSOR.
3. Install the HOLDER NO PAPER SENSOR to the Option 550 Paper Feeder with
the one screw.
After installation, check that the wires of the HARNESS ASSY
C H E C K
CLSNR 1 are not pinched.
P O I N T
Disassembly and Assembly
HOLDER NO PAPER SENSOR
SENSOR NO PAPER
Option 550 Paper Feeder
Figure 4- 124. SENSOR NO PAPER Removal
Option 550 Paper Feeder
Revision C
1)
3)
4)
JG3517AA
Confidential
320