Main Motor - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.9.2 MAIN MOTOR

Removal
Disassembly procedures for this part are different between EPL-
C H E C K
N3000 and AcuLaser M4000N. For AcuLaser M4000N, see
P O I N T
MAIN MOTOR (AcuLaser M4000N)
1. Remove the COVER REAR 500. (p.270)
2. Remove the COVER REAR. (p.167)
3. Remove the FUSER ASSY. (p.253)
4. Remove the COVER LEFT. (p.169)
5. Remove the COVER RIGHT. (p.168)
6. Remove the COVER EXIT 500. (p.261)
7. Remove the 500 EXIT ASSY. (p.262)
8. Remove the COVER TOP, CONTROL PANEL. (p.170)
9. Remove the COVER FRONT. (p.172)
10. Remove the BTR ASSY. (p.254)
11. Remove the DUCT FRONT, FAN SUB. (p.241)
12. Remove the ROS ASSY. (p.239)
Never give impact to the ROS ASSY with a screwdriver or the like.
C A U T I O N
13. Remove the SHIELD PLATE ROS. (p.243)
14. Remove the GUIDE TRAY LEFT. (p.236)
15. Remove the MOTOR COVER. (p.277)
16. Remove the SHIELD PLATE LVPS. (p.285)
17. Disconnect the connector (P/J43) of the MAIN MOTOR from the LVPS.
18. Lift the 150 FEEDER ASSY.
Disassembly and Assembly
4.14.6
(p.388).
Frame & Drive
The 150 FEEDER ASSY clicks midway when lifted, but lift it by
C H E C K
application of slight force.
P O I N T
19. Remove the three screws (gold, 6mm) securing the MAIN MOTOR to the frame.
20. Remove the MAIN MOTOR.
MAIN MOTOR
17)
19)
20)
Figure 4- 89. MAIN MOTOR Removal
Revision C
SHIELD PLATE P/J43
LVPS
LVPS
JG3179AA
Confidential
279