Lever Gate Fu - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N
4.8.11 LEVER GATE HOLDER, SPRING LEVER
GATE, LEVER GATE FU
Removal
1. Remove the COVER REAR 500. (p.270)
2. Remove the five screws (gold, tapping, 6mm) securing the CHUTE LOW FU to
the COVER REAR 500.
3. Release the hook of the COVER REAR 500, and remove the CHUTE LOW FU
from the COVER REAR 500.
4. Remove the ROLL FU. (p.271)
5. Remove the LEVER GATE FU while rotating it.
The LEVER GATE HOLDER, SPRING LEVER GATE and
C H E C K
LEVER GATE FU are supposed to detach at the same time.
P O I N T
6. Bow down the LEVER GATE FU, and remove it from the LEVER GATE
HOLDER.
The SPRING LEVER GATE will stay on the LEVER GATE
C H E C K
HOLDER side.
P O I N T
7. Remove the SPRING LEVER GATE.
Installation
1. Install the SPRING LEVER GATE.
2. Install the LEVER GATE FU to the LEVER GATE HOLDER.
3. Install the LEVER GATE FU while rotating it.
4. Install the ROLL FU. (p.271)
5. Install the CHUTE LOW FU to the COVER REAR 500, and secure it at the hook.
Disassembly and Assembly
6. Secure the CHUTE LOW FU to the COVER REAR 500 with the five screws
(gold, tapping, 6mm).
7. Install the COVER REAR 500. (p.270)

LEVER GATE FU

SPRING LEVER GATE
Figure 4- 83. LEVER GATE HOLDER, SPRING LEVER GATE,
500 Paper Exit
LEVER GATE HOLDER
LEVER GATE FU Removal
Revision C
JG3303AA
272
Confidential