Epson EPL-N3000 Service Manual page 195

EPSON EPL-N3000/AcuLaser M4000N
5. After securing the HOUSING TOP 550 to the HOUSING BASE 550 with the four
hooks, secure it with the two screws (gold, tapping, 8mm) in each of the left and
right sides and the six screws (gold, tapping, 8mm) in the rear side.
After installation, move the GUIDE ASSY END 550 and make
C H E C K
certain that the LINK SW SIZE operates smoothly.
P O I N T
6. Insert the link lever of the GUIDE INDICATOR 1 into the hole of the PLATE
ASSY BTM. (p.207)
7. Hold down the hook of the HOUSING TOP 550, and install the GUIDE ASSY SD
R550 to the HOUSING TOP 550.
After completion of installation, make sure that the three claws of
C H E C K
the GUIDE ASSY SD R550 are inserted in the grooves of the
P O I N T
HOUSING TOP 550 (NOTE 4).
8. Hold down the hook of the HOUSING TOP 550, and install the GUIDE ASSY SD
L550 to the HOUSING TOP 550.
After completion of installation, make sure that the three claws of
C H E C K
the GUIDE ASSY SD L550 are inserted in the grooves of the
P O I N T
HOUSING TOP 550 (NOTE 4).
9. Push down the PLATE ASSY BTM to have it locked.
10. With the GUIDE ASSY SD L150 and GUIDE ASSY SD R150 spread to the full
on both sides, install the GEAR PINION to the HOUSING TOP 550.
Install the GEAR PINION with the GUIDE ASSY SD R150 and
C A U T I O N
GUIDE ASSY SD L150 opened to their outermost positions.
Dislocation of the GUIDE ASSY SD R150 and/or GUIDE ASSY SD
L150 can dislocate the Side Regi.
11. Install the COVER CST to the cassette body.
Disassembly and Assembly
After completion of assembling, move the PLATE ASSY BTM up/
C H E C K
down, and make certain that the LOW IND FRONT moves up/
P O I N T
down synchronously.
550 Paper Cassette
Revision C
195
Confidential