Main Motor (Aculaser M4000N) - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.14.6 MAIN MOTOR (AcuLaser M4000N)

Removal
1. Remove the COVER REAR 500. (p.270)
2. Remove the COVER REAR (AcuLaser M4000N). (p.379)
3. Remove the FUSER ASSY. (p.253)
4. Remove the COVER LEFT. (p.169)
5. Remove the COVER RIGHT. (p.168)
6. Remove the COVER EXIT 500. (p.261)
7. Remove the 500 EXIT ASSY. (p.262)
8. Remove the COVER TOP, CONTROL PANEL (AcuLaser M4000N). (p.380)
9. Remove the COVER FRONT. (p.172)
10. Remove the BTR ASSY. (p.254)
11. Remove the DUCT FRONT, FAN SUB. (p.241)
12. Remove the ROS ASSY (AcuLaser M4000N). (p.386)
Never give impact to the ROS ASSY with a screwdriver or the like.
C A U T I O N
13. Remove the SHIELD PLATE ROS. (p.243)
14. Remove the GUIDE TRAY LEFT. (p.236)
15. Remove the MOTOR COVER. (p.277)
16. Remove the SHIELD PLATE LVPS. (p.285)
17. Disconnect the connector (P/J43) of the MAIN MOTOR from the LVPS.
18. Disconnect the connector (P/J271) of the MAIN MOTOR from the relay
connector.
19. Lift the 150 FEEDER ASSY.
Disassembly and Assembly
C H E C K
P O I N T
20. Remove the three screws (gold, 6mm) securing the MAIN MOTOR to the frame.
21. Remove the MAIN MOTOR.
MAIN MOTOR
19)
AcuLaser M4000N Unique Disassembly Procedures
The 150 FEEDER ASSY clicks midway when lifted, but lift it by
application of slight force.
17)
SHIELD PLATE
LVPS
20)
Figure 4- 179. MAIN MOTOR Removal
Revision C
P/J271
P/J43
LVPS
J23179EA
388
Confidential