Sensor Dup - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.12.7 SENSOR DUP

Removal
1. Remove the COVER RIGHT. (p.354)
2. Remove the COVER TOP. (p.346)
3. Release the hooks of the SENSOR DUP, and remove the SENSOR DUP from the
COVER HSG DUP.
4. Disconnect the connector (P/J530) of the HARNESS ASSY DUP SNR from the
SENSOR DUP.
Installation
1. Connect the connector (P/J530) of the HARNESS ASSY DUP SNR to the
SENSOR DUP.
2. Install the SENSOR DUP to the COVER HSG DUP, and secure it with the hooks.
3. Install the COVER TOP. (p.346)
When installing the COVER TOP, match its positioning holes with
C H E C K
the bosses of the COVER HSG DUP.
P O I N T
4. Install the COVER RIGHT. (p.354)
When installing the COVER RIGHT, match its positioning holes
C H E C K
with the bosses of the COVER HSG DUP.
P O I N T
Disassembly and Assembly
COVER HSG DUP
Figure 4- 150. SENSOR DUP Removal
Option Duplex
SENSOR DUP
3)
4)
HARNESS ASSY DUP SNR
Revision C
JG3607AB
350
Confidential