EPSON EPL-N3000/AcuLaser M4000N
4.11.12 ROLL ASSY GEAR NUDGER
Removal
1.
Hold down the boss of the HOLDER LEFT on the rear side of the 550 FEEDER
OPTION, shift the HOLDER LEFT in the direction of the arrow, and release the
three hooks.
2.
Remove the HOLDER LEFT from the SUPPORT NUDGER. At the same time,
the ACTUATOR NO PAPER comes off.
3.
Release the hook of the ROLL ASSY NUDGER, and pull the ROLL ASSY
NUDGER out of the SHAFT NUDGER.
4.
Release the hook of the ROLL ASSY GEAR NUDGER, and pull the ROLL
ASSY GEAR NUDGER out of the SHAFT NUDGER.
In removal, take care not to hold any rubber portion of the ROLL
C A U T I O N
ASSY NUDGER or ROLL ASSY GEAR NUDGER.
Disassembly and Assembly
UNDER VIEW
SUPPORT NUDGER
ACTUATOR NO PAPER
Figure 4- 119. ROLL ASSY GEAR NUDGER Removal
Option 550 Paper Feeder
4)
ROLL ASSY GEAR NUDGER
A (SEE DETAILED VIEW)
1-1)
1-2)
LIFT UP (BOSS)
HOLDER LEFT
Revision C
3)
ROLL ASSY NUDGER
315
Confidential