EPSON EPL-N3000/AcuLaser M4000N
4.5.2 ROLL ASSY NUDGER, ROLL ASSY FEED
Removal
1.
Open the COVER OPEN.
2.
Release the hook of the ROLL ASSY NUDGER, and pull the ROLL ASSY
NUDGER out of the SHAFT NUDGER.
3.
Release the hook of the ROLL ASSY FEED, and pull the ROLL ASSY FEED out
of the SHAFT FEED.
In removal, take care not to hold any rubber portion of the ROLL
C A U T I O N
ASSY NUDGER or ROLL ASSY FEED.
Installation
The ROLL ASSY FEED and ROLL ASSY NUDGER have
C H E C K
different names but are the same parts.
P O I N T
1.
Install the ROLL ASSY FEED to the SHAFT FEED, and secure it with the hook.
Engage properly the hook of the ROLL ASSY FEED with the
C A U T I O N
groove in the SHAFT FEED respectively.
When installing the ROLL ASSY NUDGER or ROLL ASSY
FEED, take care not to hold its rubber portion.
2.
Install the ROLL ASSY NUDGER to the SHAFT NUDGER, and secure it with
the hook.
Engage properly the hook of the ROLL ASSY NUDGER with the
C A U T I O N
groove in the SHAFT NUDGER respectively.
3.
Close the COVER OPEN.
Disassembly and Assembly
Figure 4- 40. ROLL ASSY NUDGER, ROLL ASSY FEED Removal
150 Paper Feeder
ROLL ASSY FEED
2)
ROLL ASSY NUDGER
1)
JG3008EA
Revision C
3)
213
Confidential