Epson EPL-N3000 Service Manual page 184

EPSON EPL-N3000/AcuLaser M4000N
Installation
1. Install the GUIDE ASSY END 150 to the HOUSING EXTENSION 150, and
secure it with the four hooks.
2. Install the GEAR SECTOR. (p.181)
3. Install the RACK SIZE. (p.177)
4. Install the COVER EXTENSION to the HOUSING EXTENSION 150 with the
four screws (gold, tapping, 6mm).
When installing it, make certain that the COVER EXTENSION is
C H E C K
located under the three claws of the HOUSING EXTENSION 150.
P O I N T
Always use the securing screws of 6mm length. If they are of 8mm
C A U T I O N
length, the HOUSING EXTENSION 150 will not operate smoothly
and the LOCK EXTENSION will not operate properly.
5. With the LINK SW SIZE 1-150, LINK SW SIZE 2-150 and LINK SW SIZE 3-
150 of the HOUSING BASE 150 pushed to the outside as shown in the figure,
assemble the HOUSING EXTENSION 150 into the HOUSING TOP 150 and
HOUSING BASE 150. (p.177)
Insert the two claws at the front end of the PLATE ASSY BTM into
C A U T I O N
the hooks of the HOUSING TOP 150.
6. After securing the HOUSING TOP 150 to the HOUSING BASE 150 with the four
hooks, secure it with the two screws (gold, tapping, 8mm) in each of the left and
right sides and the six screws (gold, tapping, 8mm) in the rear side.
After completion of installation, move the GUIDE ASSY END 150
C H E C K
to confirm that the LINK SW SIZE operates smoothly.
P O I N T
Disassembly and Assembly
7. Hold down the hook of the HOUSING TOP 150, and install the GUIDE ASSY SD
R150 to the HOUSING TOP 150.
After completion of installation, make sure that the three claws of
C H E C K
the GUIDE ASSY SD R150 are inserted in the grooves of the
P O I N T
HOUSING TOP150 (NOTE 4).
8. Hold down the hook of the HOUSING TOP 150, and install the GUIDE ASSY SD
L150 to the HOUSING TOP 150.
After completion of installation, make sure that the three claws of
C H E C K
the GUIDE ASSY SD L150 are inserted in the grooves of the
P O I N T
HOUSING TOP150.
9. Push down the PLATE ASSY BTM to have it locked.
10. With the GUIDE ASSY SD L150 and GUIDE ASSY SD R150 spread to the full
on both sides, install the GEAR PINION to the HOUSING TOP 150.
Install the GEAR PINION with the GUIDE ASSY SD R150 and
C A U T I O N
GUIDE ASSY SD L150 opened to their outermost positions.
Dislocation of the GUIDE ASSY SD R 150 and/or GUIDE ASSY SD
L150 can dislocate the Side Regi.
11. Install the COVER CST to the cassette body.
150 Paper Cassette
Revision C
184
Confidential