Frame & Drive; Motor Cover - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N
4.9 Frame & Drive

4.9.1 MOTOR COVER

Removal
1. Remove the COVER REAR 500. (p.270)
2. Remove the COVER REAR. (p.167)
3. Remove the FUSER ASSY. (p.253)
4. Remove the COVER LEFT. (p.169)
5. Remove the COVER RIGHT. (p.168)
6. Remove the COVER EXIT 500. (p.261)
7. Remove the 500 EXIT ASSY. (p.262)
8. Remove the COVER TOP, CONTROL PANEL. (p.170)
9. Remove the COVER FRONT. (p.172)
10. Remove the BTR ASSY. (p.254)
11. Remove the GUIDE TRAY LEFT. (p.236)
12. Remove the DUCT FRONT, FAN SUB. (p.241)
13. Remove the ROS ASSY. (p.239)
Never give impact to the ROS ASSY with a screwdriver or the like.
C A U T I O N
14. Remove the SHIELD PLATE ROS. (p.243)
15. While lifting the 150 FEEDER ASSY, remove the one screw (silver, 6mm)
securing the MOTOR COVER to the frame.
16. Disconnect the harness of the MAIN MOTOR from the clamp.
17. Remove the MOTOR COVER. (p.277)
Disassembly and Assembly
MOTOR COVER
15)
16)
Figure 4- 88. MOTOR COVER Removal
Frame & Drive
Revision C
JG3180AB
277
Confidential