Hsg Lower Dup - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.12.3 HSG LOWER DUP

Removal
1. Remove the COVER LEFT. (p.353)
2. Remove the COVER RIGHT. (p.354)
3. Disconnect the connector of the HARNESS ASSY DUP from the PWBA
DUPLEX.
4. Remove the one screw (silver, 6mm) securing the HARNESS ASSY DUP
EARTH.
5. Release the HARNESS ASSY DUP from the harness clamp.
6. Remove the one SCREW TAPPING securing the SPRING DAMPER.
7. Remove the two SCREWs HINGE securing the HSG LOWER DUP, and remove
the HSG LOWER DUP from the COVER HSG DUP.
Disassembly and Assembly
SCREW HINGE
7-1)
6)
SCREW TAPPING
SPRING DAMPER
COVER HSG DUP
Figure 4- 145. HSG LOWER DUP Removal
HARNESS ASSY DUP
Figure 4- 146. HSG LOWER DUP Removal
Option Duplex
Revision C
HSG LOWER DUP
SCREW HINGE
7-1)
7-2)
5)
HARNESS ASSY
4)
DUP
HARNESS ASSY DUP EARTH
3)
PWBA DUPLEX JG3614AB
MOTOR DUPLEX
HARNESS ASSY
DUP SNR
HARNESS ASSY
DUP EARTH
JG3615AB
Confidential
344