EPSON EPL-N3000/AcuLaser M4000N
3.4.25 OPT ASSY SIZE
Table 3-84. Troubleshooting for OPT ASSY SIZE
Step
Action and Question
Parts below can be the source of this error
• OPT ASSY SIZE
(p.306)
• HARNESS ASSY SIZE FDR1
• HARNESS ASSY SIZE FDR2
• OPTION 550 PAPER FEEDER
• 550 Paper Cassette
(p.191)
• PWBA FEEDER 550
(p.310)
• HVPS/MCU
(p.301)
Continuity of the HARNESS ASSY SIZE FDR1
1. Remove the HARNESS ASSY SIZE FDR1.
2. Check all the wires between J801 ↔ J802 for
1
continuity.
(Refer to
"Connectors
(p.406)")
♦
Do all the wires between J801 ↔ J802 have
continuity?
Continuity of the HARNESS ASSY SIZE FDR2
1. Disconnect the connector P/J80 on the PWBA
FEEDER550.
2
2. Disconnect the P/J801.
3. Check all the wires between J80 ↔ J801 for
continuity.
Do all the wires between J80 ↔ J801 have
♦
continuity?
OPT ASSY SIZE
1. Check the harness of the OPT ASSY SIZE for
3
continuity.
♦
Does the harness of the OPT ASSY SIZE have
continuity?
Troubleshooting
Yes
(Chapter 4 Disassembly and
Assembly)
(p.303)
Replace the
HARNESS
Go to Step 2
ASSY SIZE
FDR1
Replace the
HARNESS
Go to Step 3
ASSY SIZE
FDR2
Go to PWBA
Replace the
FEEDER550
OPT ASSY
(p. 130/p.
130)
SIZE
Troubleshooting for Individual Units
No
Revision C
133
Confidential