Handle Extension 550 - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.4.7 HANDLE EXTENSION 550

Removal
1. Remove the COVER CST from the cassette body.
2. Remove the two screws in the rear side of the HANDLE EXTENSION 550.
3. Release the five hooks at the top and the two hooks at the bottom, and remove the
HANDLE EXTENSION 550 from the HOUSING EXTENSION 550.
When removing the HANDLE EXTENSION 550, take care not to
C A U T I O N
mislay the LOW INDICATOR and LOW IND FRONT as they will
come off.
Installation
1. Install the LOW IND FRONT. (p.210)
2. Hitch the five hooks at the top and the two hooks at the bottom of the HANDLE
EXTENSION 550 on the HOUSING EXTENSION 550.
3. Secure the HANDLE EXTENSION 550 with the two screws.
4. Install the COVER CST to the cassette body.
After completion of assembling, move the PLATE ASSY BTM up/
C H E C K
down, and make sure that the LOW IND FRONT moves up/down
P O I N T
synchronously.
Disassembly and Assembly
2)
HANDLE EXTENSION 550
Figure 4- 35. HANDLE EXTENSION 550 Removal
550 Paper Cassette
Revision C
JG3026AB
206
Confidential